■ Features & Functions
Products compliant with european Standards (ENs)
Low unloading height, wide chamber diameter of 500 mm
The height of take-out opening is suppressed, and the maximum chamber diameter is 500 mm.
This high-capacity autoclave is suitable for sterilization of large objects such as cages.
Height of take-out opening:
HGD-113 : 805 mm, HGD-133 : 909 mm
※For reference, height of take-out opening of
HV-110 : 1040Hmm
Automatic lid opening and closing system
The lid can be opened /closed just by pressing the switch. Operators can work safely and smoothly without approaching their hands to the chamber opening when opening/closing the lid.
Electro-mechanical lid lock system Ⅱ
The electro-mechanical lid lock system Ⅱ employs the automatic slide lock method that is able to securely lock the lid by engaging the sliders with the guides provided around the lid.
Dual interlock mechanism
The lid is locked by dually detecting the chamber pressure and chamber temperature during sterilization.
The lock state is maintained even if an operation is interrupted by power failure or by manual.
The interlock mechanism keeps on operating even after a cycle is interrupted or manually stopped.
Lock release temperature setting
The lid lock release temperature can be set for every mode and memory number within the the range of 60 to 97℃
Forced cooling unit
After sterilization, the chamber pressure is lowered by cooling with a fan to shorten the time to unloading.
Dual detection system for residual air
The residual air which may cause sterilization failure is dually detected to always maintain the appropriate sterilization conditions for loads.
※The residual air is detected at the process before pressurization (during operation of an air removal timer) and at the process of pressurization air exhaust.
Exhaust level setting
An exhaust level can be selected from four levels.
Fine exhaust can be performed automatically, and fine exhaust adjustment is possible even in exhaust.
Condensation treatment of steam to reduce unpleasant steam emissions
The steam emitted at exhaust is condensed by a water-cooling unit.
The steam containing unpleasant odors, discharged into the room is reduced.
Air removal time setting
The air removal time that is effective for sterilization of Durham tubes etc. can be set freely.
Notification of drainage bottle status
Full water state of a drainage bottle is automatically detected and the state is notified with lamp and sound.
There are 3 memories for each mode and the set contents are registered.
Programmable auto-start function
This is a timer function that starts an operation at the set time.
・Power supply: Refer to the specifications. Household outlets are not recommended